ABB ACQ580, Firmware Manual

Page: 15 / 422

Introduction to the manual 11
FSCA-01 Optional RSA-485 adapter module
ID run Motor identification run. During the identification run, the drive will
identify the characteristics of the motor for optimum motor control.
IGBT Insulated gate bipolar transistor
Intermediate circuit See DC link .
Inverter Converts direct current and voltage to alternating current and voltage.
I/O Input/Output
IPC Intelligent pump control
L
ON
W
ORKS
® L
ON
W
ORKS
® (local operating network) is a networking platform
specifically created to address the needs of control applications.
LSW Least significant word
NETA-21 Remote monitoring tool
Network control With fieldbus protocols based on the Common Industrial Protocol
(CIP
TM
), such as DeviceNet and Ethernet/IP, denotes the control of the
drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC Drive
Profile. For more information, see
www.odva.org , and the following
manuals:
• FDNA-01 DeviceNet adapter module user’s manual (3AFE68573360
[English]), and
• FENA-01/-11/-21 Ethernet adapter module user’s manual
(3AUA0000093568 [English]).
Parameter User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
PFC Single pump control
PID/Loop controller Proportional–integral–derivative controller. Drive speed control is based
on PID algorithm.
PLC Programmable logic controller
PROFIBUS,
PROFIBUS DP,
PROFINET IO Registered trademarks of PI - PROFIBUS & PROFINET International
PTC Positive temperature coefficient, thermistor whose resistance is
dependent on temperature,
R0, R1, ... Frame (size)
RO Relay output; interface for a digital output signal. Implemented with a
relay.
Rectifier Converts alternating current and voltage to direct current and voltage.
SPFC Soft pump control
STO Safe torque off. See chapter The Safe torque off function in the
Hardware manual of the drive.
Term/abbreviation Explanation