manualshive.com logo in svg

ABB Ability 800xA Series, Operation

Share
Download
ABB Ability 800xA Series Operation Download Page 98

Changing Recipe Values

Section 4  TCL Displays

98

3BUR002418-600 A

 

Changing Recipe Values

Only recipe values can be changed from the Recipe Detail Display. To edit a recipe 
value, select the parameter you want to change, type a new value and press Enter.

TCL Array Plot Display

There are two primary ways plot display are configured: the Plot and the Filled Plot. 
The Plot display shows data contained in a TCL array as a contiguous trace. As 
many as two traces of data can be plotted at one time. The Filled Plot configuration, 

Figure 42

, is a single trace, filled with a color between the x-axis and the trace line. 

TCL Array Plot Format

Plot displays require a TCL floating point array to store the configuration attributes 
and plot point values. The array must be large enough to store values for all the 
points to be plotted.

Plots and filled plots can have vertical blue lines drawn at user-specified locations. 
Plots of this type are called Hybrid Plots. Hybrid plot displays are useful for flat 
sheet applications. A TCL hybrid line array is required for the hybrid plot display. 
The hybrid line array is a TCL real number array that is 260 elements long. 

Using TCL Array Plot

When using the 

In Plot Array

 option, the first 10 elements of the array are used as 

the plot display's attribute values. All other elements of the array may contain the 
plot point values. The points are drawn on the array plot display consecutively from 
left to right. Therefore, it is important that you enter the values for the plot points in 
the proper elements of the array.

Any changes to recipe values from the Recipe Detail Display are not permanent. 
The changes are temporary and only apply to the current batch.

The plot array may give you an inaccessible error on first use. Also, anything that 
causes a disconnect with the Connectivity Server will cause error values. Upon 
reconnect, inaccessible errors will occur.

Summary of Contents for Ability 800xA Series













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands