manualshive.com logo in svg

ABB Ability 800xA Series, Operation

Share
Download
ABB Ability 800xA Series Operation Download Page 228

Device Loop Templet

Appendix A  Runtime Templates

228

3BUR002418-600 A

 

SPECIAL COMMAND Field

This field specifies the command automatically sent to the device as part of 
transition override. See the description of the TRANSITION OVERRIDE field for 
an explanation of this feature.

Valid entry is:

a command from the descriptor set defined for the device on its Device 
Descriptor Templet

SAFE COMMAND Field

This field specifies the command automatically sent to the device as part of 
transition override or abnormal override. See the descriptions of the TRANSITION 
OVERRIDE field and the ABNORMAL OVERRIDE field for explanations of these 
features.

Valid entry is:

a command from the descriptor set defined for the device on its Device 
Descriptor Templet

PERMITTED COMMAND Field

This field specifies the only possible command sent to the device as part of device 
interlock. See the description of the DEV INTERLOCK ENABLE field for an 
explanation of this feature.

Valid entry is:

a command from the descriptor set defined for the device on its Device 
Descriptor Templet

REVERT ENABLE Field

This field specifies whether or not revert is enabled. When it is enabled, after the 
operator or a program changes the device command (DEV_CMND) state, 
DEV_CMND is automatically changed to the command specified in the REVERT 
COMMAND field. The revert command is an internal mechanism only and is not 
sent to the device, that is, no field changes.

Summary of Contents for Ability 800xA Series













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands