Two-way wireless system ABAX
ACU-100
40
Fig. 19. D
LOAD
10 program window with a diagram of the level of radio signal received by the
controller.
11.6 D
ESCRIPTION OF FUNCTIONS
,
OPTIONS AND COMMANDS
Identifier
– the identifier in the D
LOAD
10 program is intended to protect the controller against
an attempt of unauthorized reprogramming. The identifier consists of 16 characters. By
default, these are 0 only. They can be substituted by digits from 0 to 9 and/or letters
from A to F range. The program will not establish communication with the controller,
unless a valid identifier is entered. If data of the system we wish to get access to were
previously saved in the computer, a window will be displayed on the screen with a list of
files containing data with consistent identifier. You can choose one of these files to
establish communication.
Service code
– the keypad code (password) is intended for protection of the controller
against an attempt of unauthorized reprogramming. By default, it has the form of 12345,
but it can be changed to any sequence of 8 digits. Without entering the correct code, the
controller service mode cannot be started in the keypad.
New device
– this command initiates the procedure of adding new wireless devices to the
system.
Remove device
– this command initiates the procedure of deleting wireless devices from the
system.
Device names
– you can assign names to the wireless devices registered in the controller.
This does not apply to the controller operating together with INTEGRA or VERSA series
control panels.
Serial numbers
– this service function in LCD keypad connected to the controller makes it
possible to check the serial numbers of wireless devices included in the system. The
serial number in D
LOAD
X and D
LOAD
10 programs is displayed in on-line mode at each
device registered in the controller.
Inputs
– you should select a control input for each wireless device registered in the
controller. This does not apply to the controller operating together with INTEGRA or
VERSA series control panels.
