Two-way wireless system ABAX
ACU-100
12
•
tamper
contact
•
power supply: lithium battery CR123A 3V
3.17 APT-100
B
IDIRECTIONAL KEYFOB
•
controls the INTEGRA or VERSA alarm system
•
5 buttons for starting up to 6 selected functions
•
3 LEDs to indicate the alarm system status
•
sound signaling of keypress and transmission reception acknowledgement
•
power supply: CR2032 3V lithium battery
Note:
The APT-100 key fob is only supported by the controller interacting with the INTEGRA
(version 1.06 or later) or VERSA (version 1.01 or later) control panels. Description of
how the key fobs should be added to the users or configured – please see the user
manuals for respective control panels.
3.18 ASW-100
E
230 V
AC
W
IRELESS CONTROLLER
•
remote switch ON/switch OFF of devices to be connected to 230 V sockets
•
type of controller socket: E
•
button for manual control of 230 V electric circuit
•
LED indicator of controller status
•
power supply: 230 V AC
3.19 ASW-100
F
230 V AC
W
IRELESS CONTROLLER
•
remote switch ON/OFF of devices to be connected to 230 V sockets
•
type of controller socket: F
•
button for manual control of 230 V electric circuit
•
LED indicator of controller status
•
power supply: 230 V AC
3.20 ARF-100
R
ADIO SIGNAL LEVEL TESTER
•
checking the level of radio signal received by controller from tester, or by tester from
controller
•
simulating radio communication of devices to be supplied from battery or external sources
•
LED indicator showing the radio signal level
•
buzzer
•
power supply: alkaline battery 9 V 6LR61
4. I
NSTALLATION
The ABAX two-way wireless system should be installed so as to ensure a
suitable level of radio signal from devices working together with the controller.
This will allow the communication problems to be avoided.
All electrical connections may only be made with power supply disconnected.
Before proceeding to the system installation you should plan the arrangement of all the
devices. The installation place for the controller should be chosen so that all devices to be
supervised by it are within its range. It is recommended that the controller and the wireless
devices be mounted at a high position, which will enable a better range of radio
