ACU-100 SATEL
9
LBA
– problems with power supply of a wireless device: low battery, discharged storage
battery, or loss of external power supply. If the ACX-201 expander is registered in the
controller, overload of the expander AUX1, AUX2 supply outputs is additionally
signaled at this output.
Depending on how the outputs have been programmed (see O
UTPUTS
), activation of the
functional output is indicated as follows:
−
LED assigned to the output comes ON (outputs programmed as the NO type);
−
LED assigned to the output comes OFF (outputs programmed as the NC type).
After connecting the functional outputs to properly programmed zones of the control panel
(zone type, function, etc.), the control panel may signal occurrence of some problems in the
ABAX system. The problems can be diagnosed by means of LCD keypad or computer
connected to the controller.
Connecting the TPR output to the CA-64 control panel is unnecessary, since information on
tampers of wireless devices is transmitted through the communication bus.
3. W
IRELESS DEVICES INTERFACING WITH THE CONTROLLER
3.1 ACX-100
I
NPUT
&
OUTPUT EXPANSION MODULE
•
4 control inputs
•
8 outputs, OC type
•
communication
bus
•
tamper
contact
•
power supply: direct voltage 12 V (±15%)
3.2 ACX-200
H
ARDWIRED ZONE
/
OUTPUT EXPANDER
•
4
zones
•
4 relay outputs
•
tamper
contact
•
power supply: direct voltage 12 V (±15%)
3.3 ACX-201
H
ARDWIRED ZONE
/
OUTPUT EXPANDER WITH POWER SUPPLY
•
4
zones
•
4 relay outputs
•
switching mode power supply (1.2 A capacity)
•
battery charging and control system
•
power supply: 18 V AC
3.4 APD-100
W
IRELESS PASSIVE INFRARED DETECTOR
•
digitally processed signal from pyroelement
•
high resistance to interference
•
adjustable detection sensitivity
•
option of immunity to pets up to 15 kg in weight (detectors with firmware version 2.01 or
later)
•
remote configuration of parameters
•
changeable Fresnel lenses
•
tamper
contacts
