Two-way wireless system ABAX
ACU-100
36
Fig. 16. D
LOAD
X program window showing signal level and quality of controller
communication with wireless devices (ACU-100 controller working together with the
INTEGRA control panel).
Troubles of wireless devices (no communication, low battery level, jamming) can be read out
in the D
LOAD
X program in the T
ROUBLES
window.
11.4 LCD
KEYPAD CONNECTED TO CONTROLLER
1. Set the option of programming by means of LCD keypad on the DIP-switches on the
controller electronics board.
2. Connect the keypad to the controller (see: C
ONNECTING KEYPAD TO CONTROLLER
).
3. Enter the service code and confirm by pressing the [#] key, to get access to the menu of
controller service functions.
4. Program the controller as required.
5. Quit the service mode using the S
ERVICE END
.
6. Disconnect the keypad.
11.4.1 Service mode of keypad connected to the controller
You can move through the menu and use the service functions by means of the following
keypad keys:
S
– scroll the functions list up;
T
– scroll the functions list down;
X
– enter the function/submenu;
