Page 56 May 2014 – TD 293 OPERATING MANUAL – SmartGuard 5100/5120/5300/5320
CHAPTER 7
SmartGuard device menu
SmartGuard has a colour display and a navigation keypad to provide information and basic operational
functionality to a local user.
The device has 6 navigation keys for moving left, right, up and down in the display, a green ring to
select/enter and a red ring to return to the previous menu. The field at the bottom of each screen gives
more information about the function of the keypads.
Note! Connect to AADI Real-Time Collector to access the full set of operations and information available
with the device, refer CHAPTER 4.
7.1
Overview of the SmartGuard menu
The main menu provides access to the:
Recorder
Start and stop current recording sessions. Set recording interval if enabled during
Configuration
. If the recorder is running a red spot will show at the icon
Data Viewer
View recorded data, most recent and up to 8 previous readings. Number of recordings in
current session is displayed on the icon
System Status
Battery, Communication, Event log and Memory. Number of errors and warnings during
the current session is displayed on the icon
Configuration
View part of current configuration
Tools
Sensor info
Storage
View status and instructions for replacement of SD card
Display off:
The display is automatically switched off after a pre-set idle
time, or when pressing the red ring from the main window.
Switch the display back on by pressing any button on the
SmartGuard.
The display will switch off automatically when the
temperature inside the unit reaches -20ºC in order to
protect the display.
The menu system map is shown in Figure 7-2.
Figure 7-1 SmartGuard main menu.