Page 52 May 2014 – TD 293 OPERATING MANUAL – SmartGuard 5100/5120/5300/5320
6.7
Communication: set up Modem, GPS, auxiliary device
Open
Communication
in the
Device Layout
.
Press
Add
below the list of
Modems, GPSs and
Auxiliary Devices
, refer Figure 6-18.
Enter device information:
•
Modem type, Product name and number,
Product serial number
•
Set the COM Port number that the Modem is
connected to
•
Select the COM Port Mode
Select the Data Protocol: AADI Real-Time Out,
AADI Pseudo-Binary, AADI Ascii, NMEA Output,
AIS AtoN Met/Hyd. Please refer TN 363 for a
description of SmartGuard supported protocols.
Note! SmartGuard supports GPS with NMEA
RMC output (Recommended Minimum
sentence C). If you connect more than one GPS
source you must specify which one to read. Ref User Maintenance -> SmartGuard Platform.
Example of Pseudo Binary output:
AZ`@@@@@A@@@UUUUu[Wsxt@R`@@@@ABA\vuBByZpaCP@@@@@@@@@@@@@@@@@@@PGQDBrKS
uCBE~syAf@C@{P@CLOgEB@kLJm@poD
The output is ASCII compliant binary coded data for use in satellite communication.
Example of ASCII output:
5100 16 2011-11-15T12:47:20Z 5 68.220596 184.589996 1406.700073 -41.680000 83.699997
372.000000 11.890541 15171584 60.311272 5.349652
The output is ASCII message with tabulator separated values.
Example of NMEA output:
$WICUR,A,0,0,0.000000,295.695587,T,5.222386,0.000000,0.000000,T,B*6F
$WIMTW,31.031031,C*3F
$WIDPT,0.198722,0.000000,1000.000000*5A
$WIMWV,69.265198,R,0.151037,K,A*19
$WIXDR,C,9.624000,C,3455-1:0,P,2.218390,B,2810-1:0,H,441.000000,P,3445-1:0,G,0.000000,,R1234-1:0*4A
NMEA output for sentences CUR, MTW, MWV, DPT and XDR.
Example of AIS binary message:
Figure 6-20 Modem settings.
