May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 59
The
Sensor List
is a list of all sensors in the selected group. For
each sensor the associated icon, the name, serial number and
the value of the first parameter are displayed:
•
Select the correct sensor using the up/down navigation keys
•
Press the green ring to view the sensors
Parameters List
, refer
Figure 7-6.
The
Parameter List
displays all data in the most recent record
from the selected sensor. Use the right navigation key to scroll
to less recent values and the left key to move back to more
recent values.
If a new recording happens while inspecting the data the
viewed record will be updated since the display is on the
selected index relative to the most recent data.
7.4
System Status
System Status
accesses status information about SmartGuard device, the communication channel(s), power
supply and consumption as well as a log where events, warnings and errors are recorded. Primary
information is shown for each item in the list.
Use the up/down navigation keys to select each item and press
the green ring to view further details.
Figure 7-5 Sensor List.
Figure 7-6 Parameter List.
Figure 7-7 System Status.
