Page 22 May 2014 – TD 293 OPERATING MANUAL – SmartGuard 5100/5120/5300/5320
USB and LAN connection:
The
Lan Server Settings
are only accessible if LAN is activated in
Instrument Setup
,
refer chapter 6.9.
Enable
Keep Alive
in order to keep a connection continuously open. The client sends Keep Alive messages
and the server will keep the connection open as long as the Keep Alive messages are received within the
specified interval; if not the server will disconnect the client. Default
Keep Alive
settings are given below.
USB communication requires no settings; you can adjust the
Keep Alive
parameters (we recommend the
default setting).
Network communication settings:
You can adjust the
Keep Alive
parameters (we recommend the default setting). If conflicting with other
systems, you can change the default port 61234 for the IP connection (very rear).
3.4
Real time data and storage
Data received by the AADI Real-Time Collector are distributed to overlaying applications like e.g. AADI’s
GeoView. GeoView store received data in a database and offers a variety of real-time display panels.
Optionally data may also be stored to files directly by the Collector. These data may be exported to Excel
readable formats for analysis or post processing or read by other applications.
The application interface for receiving real-time data provided by the Collector is easy to access and to use
by third party or other customer applications. The application interface is well documented.
3.5
Overview of configuration settings
The complete configuration consists of sensor settings, presentation of data, typing fixed parameters, site
information, recording settings etc. refer for a brief overview of Table 3-1.
