May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 61
7.4.4
Power Status
The
Power Status
menu shows the current input voltage,
including max, min and average voltage since last power up.
The menu also shows the voltage and current provided for the
AiCaP bus (AiCaP PWR) and for the external sensors supplied
from SmartGuard (Sensor PWR). Max, min and average values
since last power up are also shown
Note! 5 entries are visible at a time; navigate down to find
more entries. Use the up/down navigation keys to move up
and down in the list.
7.5
Configuration
Open the Configuration menu to view the current configuration (read only).
Note! Connect to AADI Real-Time Collector to edit the
configuration, refer CHAPTER 4.
The
Configuration
menu shows the same categories as the
control panel:
Deployment Settings
,
System Configuration
and
User Maintenance
.
Navigate to each category and press the green ring to view the
current configuration.
Note! Factory Maintenance is for AADI only.
7.5.1
Deployment Settings
The
Deployment Settings
include: SmartGuard Platform site
info, recording and storage information and
sensor/modem/deployment settings.
Figure 7-11 Power Status.
Figure 7-12 Configuration.
Figure 7-13 Deployment Settings.
