May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 51
Table 6-6 User Maintenance settings for SR10/VR22 sensors.
Property
Comment
Mandatory:
Node description
Type a description. Default is product name and serial number
<parameter> Calculations:
Unit
Set the Unit for the scaled/linearized value
Range Min
Set the Range Min for the scaled/linearized value
Range Max
Set the Range Max for the scaled/linearized value
Coefficients
Set coefficients
6.6
Communication: set real- time COM port
Open
Communication
in the
Device
Layout
.
If the COM port is already defined, press
Edit
to view or change settings.
If the COM port isn’t defined, press
Add
below the list of real-time COM ports,
refer Figure 6-18. Enter COM port
description and select actual SmartGuard
COM port.
Select COM port mode.
.
Figure 6-18 Real-time COM port setting.
Figure 6-19 Real-time COM port setting.
