May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 39
Figure 6-3 New Custom DataFormat.
Measured data can be transmitted as multiline; Press
Add
to add a line, press
Duplicate
to duplicate the
selected line, or press
Remove
to delete the selected line.
A complete data message (data format) can be build up from elements in the
Message components
list and
the
Message delimiters
list, refer Figure 4-2
Verify the message line number.
•
Select elements from these message components and delimiters; drag-and-drop them into the larger list
box to the left. The order of the elements is crucial.
•
Rearrange elements by
select
drag-and-drop
within the list box.
•
IMPORTANT! Refer the data
format description on page 38 for
more details in arranging the
elements.
When the complete message is
defined:
•
Press the
OK
button save the
data format when the complete
message is defined.
•
Press
Cancel
to discard your
changes.
The
Example message
field in the
bottom of the window shows an
example string using the current
setting.
6.2.2
Serial sensors layout
Note! The sensor data format must be defined before you perform sensor layout. Refer chapter 6.2.1 for a
description of specifying a data format. Refer the sensors operating manual for sensor specific
parameters. Refer TD 268 for more details about sensor layout using AADI Real-Time Collector.
Figure 6-4 Specifying serial sensor data format.