May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 33
4.3
User maintenance
Open
Device Configuration
, press
Edit…
in the
User Configuration
heading.
In
User Maintenance
you find properties that are password protected and are set/altered by a trained user.
These properties are not changed during normal operation.
Check
Include User Maintenance
settings
, then click
Get Current
Configuration
, refer Figure 4-15.
Note! The password is: 1000
User Maintenance
is divided in two
categories:
Device Nodes
and
Sensors
.
Select
Run Wizard
to start the user
maintenance wizard for each
category, or configure specific
items by choosing from the list and
select
Configure
in the lower part
of the window.
4.3.1
Storage Manager
Open
Storage Manager.
In
History Record
select the number of
records to be available in the data
viewer.
In the
Root Folder
menu you may
select the maximum number of
sessions to be stored on the SD card.
Each time you start the record a new
session is generated.
In the
Session Folder
menu you may
select the maximum file size and
number of record in each session.
When these number is reached a new
file will be generated in the same
session folder.
Figure 4-15 Include user maintenance.