May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 29
4.2
System Configuration
System configuration deals with settings that are usually not changed between deployments/recording
sessions like e.g. sensor output parameter, timing for power control etc.
•
Open
Device Configuration
, press
Edit…
in the
System Configuration
heading.
•
Run the system configuration wizard to view/edit current configuration, or select a device node/sensor.
Press
Configure Selected...
to view/edit selected item.
The system configuration includes:
•
Properties and data options for
Real-Time Server (communication
settings)
•
Sensor configurations
4.2.1
Real-Time server
Open
Device Configuration > System
Configuration > Real-Time Server
.
Select and set property values. Press
Next
to continue.
Preferred Master:
•
Select
COM Port Only
to configure the
SMARGUARD for remote operation
through the COM port.
•
Select
LAN Server Only
to configure the
SmartGuard only using LAN.
•
Select
LAN Server ->COM Port
to
configure for remote operation through
LAN if there is a connection, else through
COM Port.
Figure 4-8 Edit system configuration.
Figure 4-9 Real-Time server.
