May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 25
CHAPTER 4
SmartGuard configuration
SmartGuard must be connected and operated through AADI Real-Time Collector in order to have access to
the full set of operations and information available with the device, refer chapter 3.3 for communication
settings.
Refer TD 268 Operating manual for AADI Real-Time Collector for a complete description of how to install and
use the application.
Select the AADI Real-Time Collector SmartGuard connection, and press
Connect
to open the connection.
•
Open
Control Panel,
Recorder Panel
and
Stop
All Groups
recording.
Note! The configuration
cannot be changed
during a recording
session.
Control panel has 4 tabs:
•
Recorder Panel
, to start
and stop
recordings, set
recording interval
•
Device Configuration
, to
edit settings for SmartGuard and
connected sensors
•
Device Layout
, to specify
which sensors and other devices
that are connected to the
SmartGuard. Configure settings
when replace, remove or add
sensors
•
System Status
, to check
hardware and software versions,
memory use, battery and power
status, communication status
and more
Figure 4-1 Configuring the SmartGuard using AADI Real-Time Collector.
Figure 4-2 Control Panel.
