Page 20 May 2014 – TD 293 OPERATING MANUAL – SmartGuard 5100/5120/5300/5320
3.2.3
Connection using LAN
Only to be used if you already using LAN as communication channel.
Figure 3-7 Connection via LAN
•
Write a name in the
Connection Name
box.
•
Select
Network Connection (Client Mode)
from the
Port Settings
drop down menu
•
Select the correct IP address, refer chapter 3.3
•
Select the Server port, refer chapter 3.3
•
Press
OK
•
Press
Open Port
and the connection to the SmartGuard should be established within a few seconds
(if not then check that correct port and port settings are used)
3.2.4
View and edit settings using AADI Real-Time Collector
•
Open
Control Panel
and select the
Device Configuration
tab
,
refer Figure 4-2
•
Press
Get Current Configuration
(do not tick the Include User Maintenance box since this require
a password, refer chapter 4.3
•
Open
System overview
to verify the device settings
•
Open
System Configuration
to verify/edit output parameters from each device, refer chapter 4.2
•
Open
Deployment Settings
to verify/edit specific deployment settings, refer chapter 4.1
