ZyXEL Communications ARMOR G5, Руководство пользователя, Страница: 139 / 186

Chapter 13 System
NBG7815 User’s Guide
139
Fig ure 81
Settings > System > Remote Access (Bridge Mode)
The following table describes the labels in this screen.
13.6 Ma inte na nc e Sc re e n
Use this screen to upgrade firmware, restart or reset your NBG7815.
Table 48 Settings > System > Remote Access
LABEL DESC RIPTIO N
HTTPS
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Interface Select the interface(s) through which a computer may access the NBG7815 using
this service.
Remote Assistance
Enable Remote Assistant Select
Ena b le
to allow customer support to help you solve the problems you
encounter with your NBG7815 remotely.
Wake on LAN
Wake on LAN Status Select
Ena b le
to have the NBG7815 forward a WoL “Magic Packet” to all devices on
the LAN if the packet comes from the WAN or remote network and uses the port
number specified in the
Po rt
field. A LAN device whose hardware supports Wake on
LAN then will be powered on if it is turned off previously.
Port Type a port number from which a WoL packet is forwarded to the LAN.
Wake on LAN MAC Address This field displays the hostname and MAC address of the LAN device by default.
Otherwise, select
Use r- De fine d
to enter the MAC Address of the device on the
network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Start Click this to have the NBG7815 generate a WoL packet and forward it to turn the
specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
Apply Click
Apply
to save your changes back to the NBG7815.
Cancel Click
C a nc e l
to begin configuring this screen afresh.