Zeiss Corona process, Руководство по обслуживанию

Страница: 4 / 42

4 Lamp replacement and calibration - Corona process | Service manual |
EN_40_070_0010I
Lamp replacement and calibration Corona process
List of figures
Fig. 1 Warning and information labels on the Corona process spectrometer 6
Fig. 2 Description of laser beam fields and paths 7
Fig. 3 Selecting the device 9
Fig. 4 Entering or scanning the IP address 10
Fig. 5 Opening the “Get device information” context menu 10
Fig. 6 Selecting the device (measuring system) 11
Fig. 7 Reading the device information 12
Fig. 8 Applying a firmware update 13
Fig. 9 Firmware version warning notification 14
Fig. 10 Notification to start the firmware update 14
Fig. 11 Firmware update is being carried out 15
Fig. 12 Confirming successful firmware update 15
Fig. 13 Removing the system cables 18
Fig. 14 Removing the Corona process from the mounting bracket 18
Fig. 15 Removing the base of the device from the device cover 19
Fig. 16 Installation positions of the halogen lamps 20
Fig. 17 Determining the lamp type 21
Fig. 18 Disconnecting the lamp cable – lamp type A 22
Fig. 19 Unscrewing the lamp holder – lamp type A 22
Fig. 20 Remove lamp holder – lamp type A 23
Fig. 21 Removing the halogen lamp – lamp type A 24
Fig. 22 Disconnecting the lamp cable – lamp type B 25
Fig. 23 Unscrewing the lamp holder – lamp type B 26
Fig. 24 Removing the lamp holder – lamp type B 26
Fig. 25 Removing the halogen lamp – lamp type B 27
Fig. 26 Guiding lamp cables through lamp holder 28
Fig. 27 Aligning the halogen lamp 29
Fig. 28 Installing the clamping ring 29
Fig. 29 Mounting the Corona process on the calibration device 32
Fig. 30 Selecting the measuring system 33
Fig. 31 Selecting the lamp 33
Fig. 32 Resetting the lamp counter 34
Fig. 33 Specifying the white standard 35
Fig. 34 Selecting the *.csv file 35
Fig. 35 Mounting the white standard 36
Fig. 36 Confirming the alignment 36
Fig. 37 Positioning the white standard 37
Fig. 38 Continuing the white calibration 37
Fig. 39 Positioning the black standard 38
Fig. 40 Continuing the black calibration 38
Fig. 41 Continuing the distance correction 39
Fig. 42 Saving the distance correction 40
Fig. 43 Selecting the spare lamp 40
Fig. 44 Creating the new *.ini file 41