15
EN_40_070_0010I
|
Service manual | Lamp replacement and calibration - Corona process
Determining the device version
Lamp replacement and calibration Corona process
The firmware update is being installed. This may take a few minutes.
Fig. 11 Firmware update is being carried out
The update was installed successfully.
Close the notification by clicking
OK.
Fig. 12 Confirming successful firmware update
The preparation tasks for the lamp replacement are now completed.
Go to Chapter “4 Replacing halogen lamps” on page 16 and read through
the safety instructions. Carry out the lamp replacement in accordance with
the following work steps.
Result
