14
Lamp replacement and calibration - Corona process | Service manual |
EN_40_070_0010I
Determining the device version
Lamp replacement and calibration Corona process
If you try to install incorrect firmware or firmware which is already installed, the
following warning message will be shown.
Fig. 9 Firmware version warning notification
If you have selected the correct firmware, the following window appears. To start
the firmware update, click
OK
.
Fig. 10 Notification to start the firmware update
Note
IMPORTANT NOTIFICATION ON THE FIRMWARE UPDATE
Do not switch off the device or interrupt the network connection to
the test computer during the update under any circumstances.
