24
Lamp replacement and calibration - Corona process | Service manual |
EN_40_070_0010I
Replacing halogen lamps
Lamp replacement and calibration Corona process
4
Removing the halogen lamp
Place the lamp holder
5
on a clean surface.
Remove the three screws
1
from the lamp holder
2
using a TX 10
screwdriver and remove the clamping ring
3
.
Remove the old halogen lamp
4
from the lamp holder.
Fig. 21
21
3
2
4
5
4.1
Removing the halogen lamp – lamp type A
5
Removing the lamp cable of the halogen lamps (lamp type A)
Unplug both lamp cables from the corresponding plug-in location on the
board and remove the lamp cables from the device.
