20
Lamp replacement and calibration - Corona process | Service manual |
EN_40_070_0010I
Replacing halogen lamps
Lamp replacement and calibration Corona process
9
Installation positions of the halogen lamps
When looking at the base of the device from the direction of the connector
panel, the default lamp
L1
is on the left hand side of the device base and
the spare lamp
L2
on the right. The corresponding labeling is also on the
base of the lamp.
Fig. 16
Spare lamp
Default lamp
L1
L2
Installation positions of the halogen lamps
Note
Always replace both halogen lamps at once.
Note
The replacing procedure of the default lamp is described in the
following steps. Replacing the spare lamp is performed accordingly to
the default lamp.
