22
Lamp replacement and calibration - Corona process | Service manual |
EN_40_070_0010I
Replacing halogen lamps
Lamp replacement and calibration Corona process
4.3 Removing halogen lamps – lamp type A
1
Disconnecting the lamp cable
Disconnect the lamp cable
1
from the lamp socket.
Place the cable at a spot where it cannot be damaged and does not affect
the following work steps.
Fig. 18
1
Disconnecting the lamp cable – lamp type A
2
Loosening the lamp holder
First remove only three of the four screws
2
from the base of the lamp.
Do this using a TX 25 screwdriver.
To avoid contact with the light guides
4
, secure the lamp holder
3
in
place and remove the fourth screw.
Fig. 19
3
2
4
Unscrewing the lamp holder – lamp type A
Procedure
