manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 410

App-39

IM AQ6370D-01EN

Appendix

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Algorithms for analysis

Channel Detection, Nominal Wavelength

Parameter
 THRESH
  MODE DIFF
 ALGO
  TEST BAND

Procedure
 PEAK

•  Channel: 

Each mode peak detected via a mode search

   

(Except for the mode peaks at levels which are lower than 
the mode at the highest level by THRESH[dB] or less.)

•  Reference wavelength:  Wavelength of each mode peak.
•  Peak wavelength/level:  Wavelength and level of each mode peak.

MEAN
•  Channel: 

Each mode peak detected via a mode search

    

(Except for the mode peaks at levels which are lower than 
the mode at the highest level by THRESH[dB] or less.)

•  Reference wavelength:  3 dB center wavelength at each mode peak.
•  Peak wavelength/level:  Wavelength and level of each mode peak.

GRID FIT
•  Channel: 

Modes within the range of GRID wavelength ± (TEST 
BAND/2) among the mode peaks detected via a mode 
search (except for the mode peaks at levels which are 
lower than the mode at the highest level by THRESH[dB] 
or less).

   

If the number of relevant modes in one GRID is more than 
one, only the mode at the highest level will be regarded as 
the channel. 

•  Reference wavelength:  GRID wavelength nearest to each channel.
•  Peak wavelength/level:  Wavelength and level of the mode peak of each channel.

GRID
•  Channel: 

A mode search shall not be performed. All GRID 
wavelengths within the range of analysis shall be the 
channels.

•  Reference wavelength:  GRID wavelength of each channel.
•  Peak wavelength/level:  Peak wavelength and peak level within the range of GRID 

wavelength ± (TEST BAND/2) of each channel.

Appendix 6  Details of Optical Filter Analysis Function

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды