manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 148

6-28

IM AQ6370D-01EN

Clearing Fixed Markers

3.

  Press the 

CLEAR MARKER

 soft key. 

4.

  The number of the fixed marker to be cleared is entered in the DATA ENTRY 

section.

5.

  Press the 

CLEAR

 soft key. 

 

 

   

Clearing All Markers

3.

  Press the 

ALL MARKER CLEAR 

 soft key. All markers (moving markers and fixed 

markers) displayed on the screen are cleared.

In addition, the MARKER ACTIVE soft key turns OFF.

Using Moving Markers to Set the Center Wavelength to Be Measured, the 
Zoom Center Wavelength, and the Reference Level 

Setting the Moving Marker Wavelength as the Measurement Center 
Wavelength

 

With the moving marker displayed, press the 

MARKER-> CENTER

 soft key. The 

measured center wavelength setting screen and setting value are displayed. 
For information on the center wavelength, see section 5.5, “Center Wavelength 
Setting.”

The measurement center wavelength can be set by continuing in the DATA ENTRY section. 

Note

The MARKER->CENTER soft key cannot be used under the following conditions. 

•  When the moving marker is OFF. 
•  When both SPLIT screens are on HOLD.
•  When the measurement data SPAN is 0 nm. 

Setting the Moving Marker Wavelength as the Zoom Center Wavelength 

 

With the moving marker displayed, press the 

MARKER-> ZOOM CTR

 soft key. 

The zoom center wavelength setting screen and setting value are displayed. For 
information on the zoom center wavelength, see section 6.1, “Zooming In/Out on 
a Wavelength.”

The zoom center wavelength can be set by continuing from the DATA ENTRY section. 

Note

The MARKER->ZOOM CTR soft key cannot be used under the following conditions. 

•  When the moving marker is OFF. 
•  When both SPLIT screens are on HOLD.
•  When the measurement data SPAN is 0 nm. 

6.9  Marker Display

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды