manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 353

10-2

IM AQ6370D-01EN

10.1  Upgrading the Firmware

8.

 

Press the YES(REBOOT) soft key.

The AQ6370D automatically restarts and starts updating. A update-in-progress screen 
appears while the firmware is being updated. When updating is complete, the AQ6370D 
automatically shuts down. This completes the update procedure. Turn the power on, and the 
AQ6370D will start normally.

Note

•  If the AQ6370D is connected to a network, you will not be able to update the firmware.
  If it is connected to a network, the message “Please disconnect LAN CABLE and remove 

USB storage device” will appear, and the YES soft key will be unavailable.

  When you remove the cable from the ETHERNET port, the message “Please remove USB 

storage device” will appear, and the YES soft key will become available.

•  Once updating starts, you cannot abort the process until it is complete. You can cancel using 

the NO soft key or another key in any of the steps before step 7.

 

 

   

The screen that appears 

while updating

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды