manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 275

8-17

IM AQ6370D-01EN

Saving/Loading Data

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Explanation

You can save data from traces A to G to internal memory or a USB storage medium, or 
assign previously saved data to trace A to G and display it. 
Also, you can save (MEMORY) data that was temporarily saved to internal memory or a 
USB storage medium, or register previously saved data to the temporary save memory. 

Extensions

The extensions used when saving TRACE and MEMORY data are as follows. 

BIN (binary format):   .WV8
CSV (ASCII format):   .CSV

File Name

You can save files by assigning their names automatically or with specific names.
If you do not specify a file name, the following file name will be assigned automatically 
according to the AUTO FILE NAME setting.
When AUTO FILE NAME is set to NUM
  File name: 

WXXXX.CSV (or .WV8)

   

XXXX is a serial number from 0000 to 9999

When AUTO FILE NAME is set to DATE
  File name: 

Wyyyymmdd_hhmmss.CSV (or .WV8)

   

yyyymmdd: Year (Gregorian) month day

   

hhmmss: Hour (24 hours) minute second

   

(Date/time when the file list was updated)

Note

•  The date/time used when file names are assigned based on the date through remote 

commands or program commands is the date/time when the file is created.

•  Only use the characters allowed in file names by MS-DOS when changing a file name. 

The maximum file name length is 56 characters (including the extension). The following 
characters can be used in file names.

 !#$%&’()-
 0123456789@
 ABCDEFGHIJKLMNOPQRSTUVWXYZ^
 abcdefghijklmnopqrstuvwxyz{}¯

Data Format

Data can be saved in the following two formats. 

BIN

Saves the file in binary format.
With this selection, the waveform data cannot be directly checked using an external 
application. The file size is smaller than that obtained with ASCII format.

CSV

Saves the file in CSV (Comma Separated Value) ASCII format.
With this selection, the waveform data can be directly checked using an external 
application. The file size is larger than that obtained with binary format.

File Size

The file size differs depending on the data saved. Be sure to check whether sufficient 
space is available before saving. 

File Sort

You can sort the file list in ascending order by file name, file type, file date, or label. 

8.3  Saving/Loading Displayed Data

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды