manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 153

6-33

IM AQ6370D-01EN

W

aveform Display 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Displaying Level Line Markers

1.

  Press the 

MARKER

 switch. The soft key menu for marker settings appears. 

2.

  Press the 

MORE 1/3

 soft key. 

3.

  Press the 

LINE MARKER 3 OFF/ON

 or 

LINE MARKER 4 OFF/ON

 soft key to 

turn the function ON. Line marker values are displayed in the upper left of the 
waveform area. 

 

 

   

Note

When level line markers 3 and 4 are displayed, the level difference (L4–L3) is shown below the 
marker values.

Moving Level Line Markers

4.

  Refer to the following and move the level line marker. 

Direction   

Moving Procedure 

Move upward 

Turn the rotary knob to the right.

     

Press the UP arrow key.

Move downward 

Turn the rotary knob to the left.

     

Press the DOWN arrow key.

Clearing All Cursors

 

Press the 

LINE MARKER ALL CLEAR

 soft key. All markers (wavelength line 

markers and level line markers) displayed on the screen are cleared.

Displaying Advanced Markers

1.

 Press 

MARKER

. A soft key menu for marker settings appears.

2.

  Press the 

ADVANCE MARKER

 soft key.

 

A soft key menu for advanced marker settings appears.

3.

  Press the 

ADV MARKER ACTIVE OFF/ON

 soft key to turn the function ON.

4.

  Press a soft key from 

MARKER 1 SELECT to MARKER 4 SELECT

.

 

A soft key menu for setting the advanced marker type and marker target trace 
appears.

6.9  Marker Display

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды