manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 347

9-22

IM AQ6370D-01EN

Setting the Language

You can select the language for the soft keys and messages from English and Chinese.

1.

 Press 

SYSTEM

.

2.

  Press the 

MORE

 soft key repeatedly until the MORE 3/4 menu is displayed.

3.

  Press the 

LANGUAGE

 soft key.

 The language setup menu appears.

4.

  Press the soft key corresponding to the language you want to select.

Turning the Display OFF

This function can be used to temporarily turn the display OFF.

1.

 Press 

DISPLAY

.

2.

  Press the 

DISPLAY OFF

 soft key. The display turns OFF.

If you press a panel key or move the mouse, the display will turn ON.

Clearing Measured Data, Analysis Conditions, Parameters, Etc.

The PRESET key clears all internal settings of the AQ6370D except for the remote 
interface (ETHERNET, GP-IB, and RS232) settings.

1.

 Press 

PRESET

. A confirmation message for clearing the message and YES and 

NO soft keys appear.

2.

  Press the 

YES

 soft key. The measured data and parameter settings are cleared.

 

If you do not want to clear them, press the 

NO

 soft key. The previous soft key 

menu will return.

Explanation

Automatic Offset

When the AUTO OFFSET is set to ON, the offset of the internal amplifier circuit is 
adjusted at time intervals of approximately 10 minutes. (Default: ON)
If the AUTO OFFSET is OFF, the auto-offset adjustment operation is not performed. 
When you switch from OFF to ON, the offset adjustment is executed immediately. 
When switched to ON, the offset adjustment is performed during repeat sweeping when 
sweeping reaches 100%. During a single sweep, the offset adjustment is performed 
when the sweep is completed. 
During offset adjustment, a message indicating that the offset is being adjusted is 
displayed in the lower-left corner and in the center of the top part of the screen.

    

Note

If, during offset adjustment, you use key operations or remote commands to execute a sweep, 
the sweep will start after the offset adjustment is completed.

9.6  Other Settings

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды