manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 194

7-19

IM AQ6370D-01EN

Analysis

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

7.8  Optical Amp Gain and NF Measurement

Procedure

Measurement can be performed of the optical amp gain and noise figure from the 
measured waveform of the signal light going into the optical amp, and the measured 
waveform of the output light leaving the optical amp.

1.

 Press 

ANALYSIS

. The soft key menu for analyzing measured waveforms 

appears. 

2.

  Press the 

ANALYSIS 2

 soft key. The analysis function selection menu is 

displayed. 

3.

  Press the 

EDFA-NF

 soft key. Analysis is performed, and the results are displayed 

in a list. The analysis results display screen is switched with the 

SWITCH 

DISPLAY

 soft key. 

 

TRACE & TABLE: A waveform and table are displayed.

 

TRACE: Only the waveform is displayed.

 

TABLE: Only the table is displayed.

 

GRAPH & TABLE: A graph and table are displayed.

 

GRAPH: Only the graph is displayed.

 

Switch the 

screen.

Note

When zooming a waveform, if you click in the list of analysis results, the waveform of the 
selected channel is displayed in the center of the waveform screen.

•  Displaying the Gain (Gain) and Noise Factor (NF) Graphs

4.

  Press the 

GRAPH & TABLE

 or 

GRAPH

 soft key. A soft key menu for the graph 

display and markers appears.

5.

  Press the 

LINE MARKER Y1

 soft key. Marker Y1 appears on the graph.

6.

  Enter the value using the rotary knob, arrow keys, or numeric keypad.

7.

 Press 

ENTER

.

8.

  Press the 

LINE MARKER Y2

 soft key. Marker Y2 appears on the graph.

9.

  Enter the value using the rotary knob, arrow keys, or numeric keypad.

10.

 Press 

ENTER

.

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды