manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 150

6-30

IM AQ6370D-01EN

Automatically Updating the Level Value of the Fixed Markers

The fixed marker’s level value is updated to track the waveform each time the displayed 
waveform is updated. 

1.

 Press 

MARKER

. 

2.

  Press the 

MORE

 soft key repeatedly until the MORE 3/3 menu is displayed.

3.

  Press the 

MARKER AUTO UPDATE OFF ON

 soft key to select ON. 

 

 

   

Setting the unit for the Marker Value 

1.

 Press 

MARKER

. 

2.

  Press the 

MORE

 soft key repeatedly until the MORE 3/3 menu is displayed.

3.

  Press the 

MARKER UNIT nm THz

 soft key. Each time you press the soft key, the 

instruments toggle between nm and THz. 

 

 

   

Note

The display unit for the marker value (wavelength or frequency) can be set independently of the 
waveform display’s horizontal axis units (wavelength or frequency) that were specified using 
the HORIZON SCALE nm/THz soft key. 

6.9  Marker Display

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды