manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 192

7-17

IM AQ6370D-01EN

Analysis

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

Parameter Settings for Analysis Results Display

These parameters are set with respect to the display format for displaying analysis 
results on the screen.

DISPLAY TYPE

This parameter is used to select the analysis results display format.

DISPLAY TYPE

Description and Procedure

ABSOLUTE 
(Absolute value display)

1.  Set CH RELATION as OFFSET or SPACING. 
  OFFSET: Displays the relative value, channel to the reference channel. 
  SPACING:  Displays the wavelength difference and level difference 

compared to the following adjacent channel.

2.  If OFFSET is selected, the reference channel is set through “REF CH”.

•  If the highest channel is used as a reference 
  Set to HIGHEST.
•  If any desired channel is used as a reference 
  Set the reference channel number in “***CH”.

RELATIVE 
(Relative value display 
relative to grid)

There are no setting fields for this display type.

(See appendix 1, “WDM Wavelength GRID Table” for information on 
changing the grid table. )

DRIFT(MEAS)
(Drift display using past 
measurement wavelength 
as a reference)

The procedure for this display type varies depending on the reference.

•  Press the MAX/MIN RESET key if you want to use the waveform 

data of the 

  current active trace as a reference. 
•  To change the measurement conditions and set the initially 

measured  waveform as the reference

  There are no parameter setting items since the data that was 

measured first becomes the reference.

DRIFT(GRID) 
(Drift display using grid 
wavelength as a reference)

The procedure for this display type varies depending on the reference.

•  Press the MAX/MIN RESET key if you want to use the waveform 

data of the current active trace as a reference. 

•  To change the measurement conditions and set the initially measured 

waveform as the reference. 

  There are no parameter setting items since the data that was 

measured first becomes the reference.

  (See appendix 1, “WDM Wavelength GRID Table” for information on 

changing the grid wavelength.)

7.7  WDM Transmission Signal Analysis

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды