manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 40

3-10

IM AQ6370D-01EN

Note

The instrument “remembers” measurement conditions, selected soft keys, waveforms being 
displayed, and other information. When the power is turned ON, the state of the instrument 
prior to the last shut down is restored. When the power is turned ON for the first time, the 
instrument starts up in the factory default state. 

Turning the Power OFF

 CAUTION

Do not cut the power to the instrument with the 

MAIN POWER 

switch on the rear 

panel when an operation is in progress. The operating system configuration file will 
not be backed up, possibly resulting in malfunctions upon start up the next time the 
instrument is turned ON. Always use the above procedure to shut down. 

1.

  Press the 

POWER 

switch on the front panel of the instrument. A shut down 

confirmation message is displayed along with the 

YES

 and 

NO

 soft keys. 

2.

  Press the 

YES

 soft key. The message, “AQ6370D is shutting down. Please wait...” 

appears, and shut-down begins. If you do not wish to shut down, press the 

NO

 

soft key. The screen returns to the original soft key menu. 

3.

  After the 

POWER 

switch changes from green to orange, turn OFF the 

MAIN 

POWER

 switch on the rear panel of the instrument. 

You can also shut down the instrument using panel keys and soft keys.

1.

 Press 

SYSTEM

.

2.

  Press the 

MORE

 soft key repeatedly until the MORE 4/4 menu is displayed.

3.

  Press the 

SHUT DOWN

 soft key. 

4.

  Press the 

YES

 soft key. Shut down begins. 

5.

  After the 

POWER 

switch changes from green to orange, turn OFF the 

MAIN 

POWER

 switch on the rear panel of the instrument. 

  

Note

If for some reason the instrument fails to shut down normally, hold down the 

POWER 

switch 

for approximately four seconds or longer to force standby mode. Note that the operating system 
configuration file will not be backed up, possibly resulting in malfunctions upon start up the next 
time the instrument is turned on. 

3.4  Turning the Power ON/OFF

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды