manualshive.com logo in svg

YOKOGAWA AQ6370D, Руководство пользователя

Поделиться
Скачать
YOKOGAWA AQ6370D Скачать руководство пользователя страница 344

9-19

IM AQ6370D-01EN

Other Operations

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

11 

App

Index

•  Changing the Password

5.

  Press the 

CHANGE LOCK PASSWORD

 soft key. A password input screen 

appears.

6.

  Enters a new 4-digit password. A screen to reenter the password appears.

7.

  Reenter the password entered in step 6. A password change completion message 

appears.

Note

•  The characters that can be used for the password are numbers from 0 to 9.
•  If you forget the password when the keys are locked, you will not be able to unlock.
  If you change the password from the default, manage your password carefully.

Unlocking the Keys

1.

  Press any of the locked keys (other than USER, LOCAL, COPY, or HELP keys or 

POWER switch). A soft key menu for unlocking the keys appears.

2.

  Press the 

UNLOCK

 soft key. A password input screen appears.

3.

  Enters the password. A message stating that the keys have been unlocked 

appears, and the soft key menu changes to a USER menu.

 

 

   

Note

Even when the keys are locked, you can still use the AQ6370D remote commands and program 
commands as usual. However, if the AQ6370D is in remote mode as a result of receiving REN 
(Remote Enable) or a listen address with ATN set to True from the controller, the key lock 
cannot be released. In such a case, press the LOCAL key to switch the AQ6370D to remote 
mode, and then release the key lock.
For details on switching between local and remote modes, see section 1.2 in the remote control 
user’s manual, IM

 

AQ6370C-17EN.

9.5  Locking Keys

Содержание AQ6370D






























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды