YASKAWA U1000 iQpump Drive, Техническое руководство

Страница: 519 / 706

<4> When E3-13, Motor 2 Base Voltage, is set to 0.0, output voltage is controlled with E3-05, Motor 2 Maximum Voltage, = E3-13. When Auto-Tuning
is performed, E3-05 and E3-13 are automatically set to the same value.
u
E4: Motor 2 Parameters
These parameters are hidden when a PM motor control mode has been selected for motor 1 (A1-02 = 5, 6, 7).
No.
(Addr.
Hex)
Name LCD Display Description Values Page
E4-01
(0321)
Motor 2 Rated Current Motor Rated FLA
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the full load current for motor 2. Automatically set during
Auto-Tuning.
Default:
<1>
Min.: 10% of
drive rated
current
Max.: 150% of
drive rated
current
<2>
259
E4-02
(0322)
Motor 2 Rated Slip Motor Rated Slip
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the rated slip for motor 2. Automatically set during
Auto-Tuning.
Default:
<1>
Min.: 0.00 Hz
Max.: 20.00 Hz
259
E4-03
(0323)
Motor 2 Rated No-Load
Current
No-Load Current
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the no-load current for motor 2. Automatically set during
Auto-Tuning.
Default:
<1>
Min.: 0 A
Max.: E4-01
<2>
259
E4-04
(0324)
Motor 2 Motor Poles Number of Poles
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the number of poles of motor 2. Automatically set during
Auto-Tuning.
Default: 4
Min.: 2
Max.: 48
260
E4-05
(0325)
Motor 2 Line-to-Line
Resistance
Term Resistance
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the phase-to-phase resistance for motor 2. Automatically
set during Auto-Tuning.
Default:
<1>
Min.: 0.000 Ω
Max.: 65.000 Ω
260
E4-06
(0326)
Motor 2 Leakage
Inductance
Leak Inductance
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the voltage drop for motor 2 due to motor leakage
inductance as a percentage of rated voltage. Automatically set
during Auto-Tuning.
Default:
<1>
Min: 0.0%
Max: 40.0%
260
E4-07
(0343)
Motor 2 Motor Iron-
Core Saturation
Coefficient 1
Saturation Comp1
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV OLV CLV
Set to the motor iron saturation coefficient at 50% of magnetic
flux for motor 2. Automatically set during Auto-Tuning.
Default: 0.50
Min.: 0.00
Max.: 0.50
260
E4-08
(0344)
Motor 2 Motor Iron-
Core Saturation
Coefficient 2
Saturation Comp2
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV OLV CLV
Set to the motor iron saturation coefficient at 75% of magnetic
flux for motor 2. This value is automatically set during
Auto-Tuning.
Default: 0.75
Min.: E4-07
Max.: 0.75
260
E4-09
(033F)
Motor 2 Mechanical
Loss
Mechanical Loss
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV OLV CLV
Sets the motor mechanical loss for motor 2 as a percentage of
motor rated power (kW).
There is normally no need to change this parameter from the
default value.
Default: 0.0%
Min.: 0.0
Max.: 10.0
260
E4-10
(0340)
Motor 2 Iron Loss Motor Iron Loss
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG
Sets the motor iron loss.
Default:
<1>
Min.: 0 W
Max.: 65535 W
260
E4-11
(0327)
Motor 2 Rated Power Mtr Rated Power
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f V/f w PG OLV CLV
Sets the motor rated capacity in kW. Automatically set during
Auto-Tuning.
Default:
<1>
Min.: 0.00 kW
Max.: 650.00 kW
261
<1> Default setting is determined by parameters C6-01, Drive Duty Selection, and o2-04, Drive Model Selection.
B.7 E: Motor Parameters
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual 519
B
Parameter List