n
A1-07: DriveWorksEZ Function Selection
Enables and disables the DriveWorksEZ program inside the drive.
DriveWorksEZ is a software package for customizing drive functionality or adding PLC functionality by the interconnection
and configuration of basic software function blocks. The drive performs user-created programs in 1 ms cycles.
Note:
1.
If DriveWorksEZ has assigned functions to any of the multi-function output terminals, those functions will remain set to those terminals
even after disabling DriveWorksEZ.
2.
For more information on DriveWorksEZ, contact a Yaskawa representative.
No.
Parameter Name
Setting Range
Default
A1-07
DriveWorksEZ Function Selection
0 to 2
0
Setting 0: DWEZ disabled
Setting 1: DWEZ enabled
Setting 2: Digital input
If a digital input is programmed for DWEZ enable/disable (H1-
oo
= 9F), DWEZ will be enabled when the input is opened.
u
A2: User Parameters
n
A2-01 to A2-32: User Parameters 1 to 32
The user can select up to 32 parameters and assign them to parameters A2-01 through A2-32 to provide quicker access by
eliminating the need to scroll through multiple menus. The User Parameter list can also save the most recently edited
parameters.
No.
Parameter Name
Setting Range
Default
A2-01 to A2-32
User Parameters 1 to 32
b1-01 to o4-19
Determined by
A1-06
<1> This is the default setting of the Setup Mode parameters.
<2> A1-06 determines how the setting of user parameters A2-01 through A2-32 are changed.
Refer to Application Selection on page 154
Saving User Parameters
To save specific parameters to A2-01 through A2-32, set parameter A1-01 to 2 to allow access to all parameters, then enter
the parameter number to one of the A2-
oo
parameters to assign it to the list of User Parameters. Finally, set A1-01 to 1 and
change to Setup Mode to restrict access so users can only set and refer to the parameters saved as User Parameters.
n
A2-33: User Parameter Automatic Selection
Determines whether recently edited parameters are saved to the second half of the User Parameters (A2-17 to A2-32) for
quicker access.
No.
Parameter Name
Setting Range
Default
A2-33
User Parameter Automatic Selection
0, 1
Determined by
A1-06
Setting 0: Do not save list of recently edited parameters
Set A2-33 to 0 to manually select the parameters listed in the User Parameter group.
Setting 1: Save list of recently edited parameters
Set A2-33 to 1 to automatically save recently edited parameters to A2-17 through A2-32. A total of 16 parameters are saved
with the most recently edited parameter set to A2-17, the second most recently to A2-18, and so on. Access the User Parameters
using the Setup Mode of the digital operator.
Note:
User parameters are listed from A2-27 to A2-32. Parameters A2-01 to A2-26 are already listed as defined by default when in Setup Mode.
5.1 A: Initialization
186
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
Содержание U1000 iQpump Drive
Страница 705: ......
