Chapter 6
Component Guide
DME Designer Owner’s Manual
414
■
One Input to All Outputs
When you click the input channel number on the left side of the matrix, the [Matrix Mixer - One Input
to All Outputs] editor window opens. One input channel and all output channels are displayed. The
input channel is the one you have clicked on in the delay mixer component editor.
Input Channel Switching
The [Matrix Mixer - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the matrix mixer component editor.
The [Channel] buttons in the [Input] section of the [Matrix Mixer - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
If you make the matrix mixer component editor active while the [Matrix Mixer- One Input to All
Outputs] editor window is displayed, and then click another input channel, that channel will be
displayed in the [Matrix Mixer - One Input to All Outputs] editor window.
One [Matrix Mixer - One Input to All Outputs] editor window is displayed for each matrix mixer
component editor.
Section
Parameter
Setting Range
Function
1
Input
Channel
--
Displays the selected input channel. Select
another channel from a menu.
2
Phase
ON/OFF
Reverses the phase of the input signal.
3
Level
-
∞
to +10 dB
Sets the input signal level.
4
Solo
ON/OFF
Turns solo ON. If Solo is engaged for even
one channel, all non-Solo channels will be
muted.
5
On
ON/OFF
Turns input ON.
6
Bus Send Level
Level
-
∞
to +10 dB
Sets the signal level for each output channel.
7
On
ON/OFF
Turns ON the output for each output channel.
8
Block
On
--
Turns ON all channel outputs. When turned
ON, the [On] button lights up.
9
Off
--
Turns OFF all channel outputs.
)
Nominal
--
Resets all output signal levels, making them
0 dB.
!
Minimum
--
Resets all output signal levels, making them
-
∞
dB.
8
9
!
)
1
2
4
5
3
6
7
