Page: 66
SmartPad LCD
™
© 2008 Xantech Corporation
Section 6: Options Settings
In the
Project Options Window
in Universal Dragon, the user can change the settings for RC68 Code Group,
Bank Track Code Group, Status Line and LED Operation, Backlight Control, Display Orientation, RS232 Port
Settings, MRC88 Emulation and Password.
Figure 48 – SPLCD Options Settings
RC68 CODE GROUP
The
RC68 Code Group
setting refers to the group of IR codes that will be used to
trigger RC68 Sequences
as
discussed in
Section 5
. The number associated with this
Code Group
refers to the
dial setting
on the rear of a
RC68+/X Handheld Programmer
(
Figure 49
). The
SPLCD Default Code Group
is
C9
. This setting only
needs to be changed if multiple SPLCD’s are connected in parallel and have different control functions, if they
are all within line of sight of a remote programmed with Bank Track Codes, or if there is an IR code group
conflict with some other device used in the same system.