SmartPad LCD
™
Page:
67
© 2008 Xantech Corporation
Figure 49 – RC68+/X Handheld Programmer Code Group
BANK TRACK CODE GROUP
When an SPLCD is used in a system in conjunction with other controllers (i.e. handheld remotes or other
SPLCD panels) in which the equipment can be controlled from multiple locations, the SPLCD panels have the
ability to track source selections simultaneously for in-sync operation for the current source selection if the
remotes and SPLCD’s are all configured with the same Bank Track Codes and the SPLCD’s are connected in
Parallel.
Example: If a user walks into a room and selects DVD on the SPLCD and then decides to select CD using a
handheld remote, the SPLCD will automatically switch to the CD source page. The same thing will happen
when multiple SPLCD’s are connected in parallel and a selection is made on one panel, the other panels will
automatically switch to the source page selected.
The default Bank Track Code Group is
D8
.
TRACK LED SETTING
The
Status LED
(
Figure 2 - Item 3
) can be configured to track the
Status Terminal
on the rear of the
SPLCD
(
Figure 3 – Item 19c
). If this is desired
LED Track
should be
selected
(check mark). The
default setting
is
de-selected
(no check mark).
When the
LED Track
is
selected
(check mark), the
Status LED
will turn
ON
whenever a positive voltage (5-
30VDC) is present on the
Status Terminal
on the rear of the
SPLCD
. Whenever this voltage is LOW (0V DC)
the
Status LED
will turn
OFF
.
This works in conjunction with the
Line Input Role
setting.
LINE INPUT ROLE SETTING
The
Status Terminal
on the rear of the
SPLCD
(
Figure 3 – Item 19c
) can be configured as either an
Input
to
sense the state of an external device or as an
Output
to control an external device.