SmartPad LCD
™
Page:
65
© 2008 Xantech Corporation
ASSIGNING BANK TRACK CODES TO SOURCE GTL’S
By assigning discrete
Bank Track Codes
to each
Source Button
, the SPLCD can work in conjunction with
accompanying learning hand held remotes (similar to Xantech Model URC-2P/B) or other Xantech Keypads or
SPLCD panels in the same zone. When a source is changed on the accompanying hand held remote (or
another SPLCD panel), the Source Pages on all keypads will change to remain in sync with the current Source
selection.
Figure 47 – Assigning Bank Track Codes to Source GTL’s
Programming Bank Track Codes
1.
In the
SPLCD System Window
, select the
Macros Tab
.
2.
Right-click on a
Source Button
and select
Properties
or in the
Palette Editor
, select the
Properties Tab
.
3.
In the
Properties Window
, at the bottom of the window, in the
Button Attributes
, click
Bank Track
and
select the appropriate
Bank Track Code
, for the selected source, from the
pull-down
.
NOTE 1:
Default
Code Group
for Bank Track codes is
D8
and can be found under
the Project Options
Icon in the Tool Bar.
NOTE 2:
The
URC-2P/B
is pre-programmed with
Bank Track Codes 1-8
and is directly compatible with
the SPLCD Bank Track Code system.