SmartPad LCD
™
Page:
9
© 2008 Xantech Corporation
SMARTPAD LCD FEATURES
LCD Touch Screen Interface:
Allows for use of GTL’s (Graphical Touch Links). Colorful graphical
representation of functional buttons for touch control of IR and RS232 controlled devices
Upper and Lower Viewing Angles:
Software Programmable for exact viewing placement
Programmable Backlight Control:
Selectable Time-Out for LCD backlight
Standard Xantech IR Bus Output:
Allows for easy interface to existing IR networks
Internal IR Code Library:
Built in IR Code Library. Contains all Major Brand Component IR commands. No
need to ‘learn’ commands.
IR Learning:
IR commands can be learned from external hand-held remotes through the SPLCD’s built-in
IR learning eye to add to the SPLCD’s built-in IR code library.
Macros:
can be built using IR, RS232, repeat or delay commands and associated with a specific button or
event triggered by a keypad button press, an RC68 IR code, an MRC88 compatible keypad command,
control sense status, or by RS232. Up to 40 IR commands can be issued in a single Macro.
IR Receiver:
Broad-band IR Receiver (30kHz-100kHz) for pass through of IR commands from Hand-Held
IR Remotes
Talk Back / Status LED:
LED indicates presence of IR and/or programmable STATUS indication of Zone
or other user defined power on/off indicator.
RC68 IR Trigger Sequencer
: Trigger IR and/or RS232 Macros via RC68 IR command received at the built-
in IR Receiver
Status Input
: Trigger IR and/or RS232 Macros with a voltage between 5-30V DC, 100mA.
Status Output:
Send an output voltage to trigger the on/off state of another device or indicator. 12V DC @
100mA.
Serial I/O:
RS232 control over an RS422 line for RS232 control of remotely located RS232 controlled
devices (Requires optional RS422232 adapter).
MRC88 Plug-N-Play:
Direct connect to standard Keypad Input of MRC88CTL for full zone control
RS232 Com/USB Com
Programming Ports:
Communication Programming Ports located on the front
panel of the SPLCD under the bezel, used to program the system using Universal Dragon™ Software
Emitter Output:
Local Emitter port on the SPLCD Rear Panel. Output from IR Bus & GND terminals, 12V
DC @100mA. (IR In Zone feature, MRC88 only)
Full Motion Video Input (SPLCD64V only):
NTSC/PAL composite video input for PiP or full screen, full
motion video display
Firmware Upgradeable for ‘Future Proof’ Technology:
Upgradeable via RS232 Com Port or USB
Programming Port. Firmware upgrades available for easy download by following links within Universal
Dragon Software (www.xantech.com/products/firmware.htm)