WTC MedWeld 3005, Руководство оператора

Страница: 145 / 206

=UTGU\T# %?`UbQd_bµc7eYTUD)## " '!
= #" "%1`bY\" "
6WHSSHU'DWD
The MedWeld 3005 provides steppers, to help compensate for
changes in the welding environment. These stepper settings are
programmable, to control how the weld processor will
compensate for these variations.
:KDWLVD6WHSSHU"
The MedWeld 3005 provides two distinct types of steppers:
• A linear stepper (which adds heat according to a stepper
profile that you program) and
• The SureWeld stepper. This monitors expulsion and
maintains the weld current at a point just below expulsion,
based on a list of parameters you program.
You program steppers using the WTC programming device. Tell
the weld processor which type of stepper you want to control the
weld schedule, by using the stepper assignment functions (#82 or
#83). These assign both a stepper number and the type of stepper
(linear or SureWeld) to the weld schedule.
You can program up to 99 linear steppers and 99 SureWeld
steppers. The following sections describe each stepper type,
along with directions on how to program the steppers.
You can assign a stepper to a group. This capability allows for
incrementing the stepper when the control executes any weld
schedule assigned to that group. You can also advance or reset a
group of steppers.