WTC MedWeld 3005, Руководство оператора

Страница: 57 / 206

9^cdQ\\Y^WdXU=UTGU\T# %
=UTGU\T# %?`UbQd_bµc7eYTUD)## " "!'
= #" "%1`bY\" "
MedLAN Connector (on the weld processor card):
3QedY_^gXU^S_^^USdY^WgYdXdXU
45@! $@b_WbQ]]Y^W4UfYSU*
BU]_fU`_gUb256?B5QddU]`dY^Wd_S_^^USd_b
TYcS_^^USdSQR\Y^W5hUbSYcUSQbUgXU^]Q[Y^WdXU
=UT<1>SQR\US_^^USdY_^c9VdXU=UT<1>SQR\U
cX_e\TRUS_]US_^^USdUTd_dXU=4@!Q^T=4@"
`_gUbS_^^USdY_^ccUbY_ecTQ]QWUd_
S_]]e^YSQdY_^S_]`_^U^dcG9<<_SSeb
:$51,1*
NEVER connect any of the communication ports
to the MDP- power wires. Damage to the ports
or other internal components may result.
Designator Pin # Function
Wire Color
(BELDEN #9463)
MDL2 3 MedLan Line 2 Clear
MDLS 2 Line Shield
MDL1 1 MedLAN Line 1 Blue
Designator Function
MDL1 - MedLAN Line 1
This is the TX/RX + line of the RS–
485 signal. Attach it to the blue wire
of the cable.
MDL2 - MedLAN Line 2 This is the TX/RX – line of the RS–
485 signal. Attach it to the clear or
white wire of the cable.
Shield Connect the shield to the drain wire
of the cable.