WTC MedWeld 3005, Руководство оператора

Страница: 180 / 206

Dec. Octal
Weld Control
Bits (WCU #2) Global (Enclo-
sure) Bits Weld Control
Bits (WCU #5)
Spare Bits
Weld Control
Bits (WCU #8)
Spare Bits
Weld Control
Bits (WCU #11)
Spare Bits
08 10 BINARY
SELECT #1 CONTROL
STOP BINARY
SELECT #1 Spare BINARY
SELECT #1 Spare BINARY
SELECT #1 Spare
09 11 BINARY
SELECT #2 ENABLE
CONTACTOR
SAVER BINARY
SELECT #2 Spare BINARY
SELECT #2 Spare BINARY
SELECT #2 Spare
10 12 BINARY
SELECT #4 GLOBAL
STEPPER
RESET BINARY
SELECT #4 Spare BINARY
SELECT #4 Spare BINARY
SELECT #4 Spare
11 13 BINARY
SELECT #8 GLOBAL
FAULT RESET BINARY
SELECT #8 Spare BINARY
SELECT #8 Spare BINARY
SELECT #8 Spare
12 14 BINARY
SELECT #16
Reserved
b BINARY
SELECT #16 Spare BINARY
SELECT #16 Spare BINARY
SELECT #16 Spare
13 15 INITIATE
WELD Reserved INITIATE
WELD
Spare INITIATE WELD Spare INITIATE
WELD Spare
14 16 WELD INPUT Reserved WELD INPUT Spare WELD INPUT Spare WELD INPUT Spare
15 17 STEPPER
RESET Reserved STEPPER
RESET
Spare STEPPER
RESET Spare STEPPER
RESET Spare
a. To use the tri-pack enclosure as a dual-pack, refer to “Local and Safety I/O” for a description of the WCU #3 NOT PRESENT input (page 3-2).
(When this input is held HIGH, WCU #3 is disabled and the weld processor card can be removed from the chassis.)
b. Reserved for RIO communication status and Host PLC status.
Bits Word 0 Word 1 Word 2 Word 3 Word 4 Word 5 Word 6 Word 7