WESTLOCK CONTROLS CORPORATION
280 N. MIDLAND AVE., STE. 258, SADDLE BROOK, NJ 07663 TEL: 201-794-7650 FAX: 201-794-0913
www.westlockcontrols.com
10/5/2013
TECH-477/D.W.O. 21424
Page 143 of 206
calibration.
Pressure Port B: Pressure of manifold output port B - reserved for future use. (The
current manifold has pressure sensor only on one output - Port A)
Internal Temp
Unit:
Engineering unit for the electronic board temperature sensor.
Internal
Temperature:
Electronic board temperature in units as defined in the
INTERNAL_TEMP_UNIT parameter.
10.3.6
Valve and Actuator Info
A subdirectory of ICoT PA, it contains a group of parameters that allows the user to
configure the type and information of the valve and actuator setup.
Valve Manufacturer: Name of the valve manufacturer.
Actuator Manufacturer: Name of the actuator manufacturer.
Valve Type: Type of valve movement (rotary or linear). It has the following
options:
- Rotary moving valve;
- Linear moving valve.
Actuator type: Type of actuator. It has the following options:
- pneumatic;
- electric;
- hydraulic;
- Others.
Actuator action Fail-Safe position for power-loss of the actuator regarding the
valve position. It has the following options:
- Not initialized;
- Opening (100%);
- Closing (0%);
- None (actual position).
Valve Serial Number: Serial number of the valve belonging to the positioner or the
electronic device.
Actuator Serial
Number:
Serial number of the actuator belonging to the positioner or the
electronic device.
10.3.7 Calibration
The calibration option is showed as subdirectory of ICoT PA, Figure 10-1, where is
possible to check the current values, and an option in the device menu, Figure 10-2,
where it is possible to write at available parameters. It contains a group of parameters
