WEG CFW300 V1.3X, Руководство по программированию

Страница: 16 / 157

0
Quick Reference of Parameters, Alarms and Faults
0-8 | CFW300
Param. Description Adjustable Range Factory Setting Prop. Page
P304
Skip Frequency 2 0.0 to 400.0 Hz 0.0 Hz 11-10
P306 Skip Band 0.0 to 25.0 Hz 0.0 Hz 11-10
P308 Serial Address 1 to 247 1 cfg 16-1
P310 Serial Baud Rate 0 = 9600 bits/s
1 = 19200 bits/s
2 = 38400 bits/s 1 cfg 16-1
P311 Serial Bytes Config. 0 = 8 bits, No, 1
1 = 8 bits, Even, 1
2 = 8 bits, Odd, 1
3 = 8 bits, No, 2
4 = 8 bits, Even, 2
5 = 8 bits, Odd, 2 1 cfg 16-1
P312 Serial Protocol 0 to 1 = Reserved
2 = Slave Modbus RTU
3 and 4 = Reserved
5 = Master Modbus RTU 2 cfg 16-1
P313 Action for Comminic. Error 0 = Inactive
1 = Ramp Stop
2 = General Disable
3 = Go to LOC
4 = LOC Keep Enab
5 = Cause Fault 1 16-1
P314
Serial Watchdog 0.0 to 999.0 s 0.0 s cfg 16-1
P316
Serial Interf. Status 0 = Inactive
1 = Active
2 = Watchdog Error ro 16-1
P320
Flying Start/Ride-Through 0 = Inactive
1 = Flying Start
2 = FS / RT
3 = Ride-Through 0 cfg 11-7
P331 Voltage Ramp 0.2 to 60.0 s 2.0 s 11-7
P332 Dead Time 0.1 to 10.0 s 1.0 s 11-7
P340 Auto-Reset Time 0 to 255 s 0 s cfg 14-7
P352 Fan Control Configuration 0 = OFF
1 = ON
2 = CT 2 cfg 14-3
P358
(*)
Encoder Fault Config. 0 = Off
1 = F067 ON
2 = F079 ON
3 = F067, F079 ON 3 cfg 14-8
P375
(*) Temperature NTC 0 to 100 ºC (32 °F to 212 °F) ro 12-5
P397 Control Configuration 0000 to 000F (hexa)
Bit 0 = Slip Compens. Regen.
Bit 1 = Reserved
Bit 2 = IO Stabilization
Bit 3 = P297 Reduction
Temperature 000Bh cfg 8-2
P399 Motor Rated Efficiency 50.0 to 99.9 % 67.0 % cfg, V V W 10-4
P400 Motor Rated Voltage 0 to 240 V According to
Table 10.2 on page
10-4
cfg, V V W 10-4
P401 Motor Rated Current 0.0 to 40.0 A 1.0 x I
nom
cfg 10-4
P402 Motor Rated Speed 0 to 30000 rpm 1720 (1310) rpm cfg 10-4
P403 Motor Rated Frequency 0 to 400 Hz 60 (50) Hz cfg 10-4
P404 Motor Rated Power 0 = 0.16 HP (0.12 kW)
1 = 0.25 HP (0.18 kW)
2 = 0.33 HP (0.25 kW)
3 = 0.50 HP (0.37 kW)
4 = 0.75 HP (0.55 kW)
5 = 1.00 HP (0.75 kW)
6 = 1.50 HP (1.10 kW)
7 = 2.00 HP (1.50 kW)
8 = 3.00 HP (2.20 kW)
9 = 4.00 HP (3.00 kW)
10 = 5.00 HP (3.70 kW) According to
inverter model
cfg, V V W 10-5
P405
(*) Encoder Pulse Number 32 to 9999 1024 cfg 10-5