WEG CFW300 V1.3X, Руководство по программированию

Страница: 21 / 157

0
Quick Reference of Parameters, Alarms and Faults
CFW300 | 0-13
Param. Description Adjustable Range Factory Setting Prop. Page
SoftPLC Parameter Configuration for PID Controller Application (P903 = 1)
P910 PID Controller Application Version 0.00 to 90.00 ro 18-8
P911 Control Setpoint -9999 to 9999 [SPLC Eng. Un.] 200 rw 18-8
P912
Control Setpoint 1 -9999 to 9999 [SPLC Eng. Un.] 200 18-8
P913
Control Setpoint 2 -9999 to 9999 [SPLC Eng. Un.] 230 18-8
P914 Control Setpoint 3 -9999 to 9999 [SPLC Eng. Un.] 180 18-8
P915 Control Setpoint 4 -9999 to 9999 [SPLC Eng. Un.] 160 18-8
P916 Control Process Variable -9999 to 9999 [SPLC Eng. Un.] ro 18-9
P917 PID Controller Output 0.0 to 100.0 % ro 18-9
P918 PID Controller Setpoint in Manual
Mode 0.0 to 400.0 Hz 0.0 Hz 18-9
P919 PID Controller Logical Status Bit 0 = Sleep Mode Active (A750)
Bit 1 = PID in Manual (0) /
Automatic (1)
Bit 2 = PV Low Level (A760)
Bit 3 = PV Low Level (F761)
Bit 4 = PV High Level (A762)
Bit 5 = PV High Level (F763)
Bit 6 to 15 = Reserved ro 18-9
P920 Selection of the Control Setpoint
Source 0 = Control Setpoint via HMI or
Communication Networks (P911)
1 = Control Setpoint via Analog
Input AI1
2 = Control Setpoint via Analog
Input AI2
3 = Control Setpoint via
Electronic Potentiometer (EP)
4 = Two Setpoints via Digital
Input DI3 (P912 and P913)
5 = Three Setpoints via Digital
Inputs DI3 and DI4 (P912, P913
and P914)
6 = Four Setpoints via Digital
Inputs DI3 and DI4 (P912, P913,
P914 and P915) 0 cfg 18-10
P921 Selection of the Control Process
Variable Source 1 = Control Process Variable via
Analog Input AI1
2 = Control Process Variable via
Analog Input AI2
3 = Control Process Variable via
Difference between Analog Input
AI1 and AI2 1 cfg 18-12
P922
Minimum Sensor Level of the
Control Process Variable -9999 to 9999 [SPLC Eng. Un.] 0 18-12
P923 Maximum Sensor Level of the
Control Process Variable -9999 to 9999 [SPLC Eng. Un.] 400 18-12
P924
Value for Low Level Alarm for the
Control Process Variable; -9999 to 9999 [SPLC Eng. Un.] 100 18-13
P925 Time for Low Level Fault for the
Control Process Variable 0 to 9999 s 0 s 18-13
P926
Value for High Level Alarm for the
Control Process Variable -9999 to 9999 [SPLC Eng. Un.] 350 18-13
P927 Time for High Level Fault for the
Control Process Variable 0 to 9999 s 0 s 18-14
P928
Selection of the PID Controller
Control Action 0 = Disable PID Controller
1 = Enable PID Controller in
Direct Mode
2 = Enable PID Controller in
Reverse Mode 0 cfg 18-14
P929 PID Controller Operation Mode 0 = Manual
1 = Automatic
2 = Select Control to Manual (0)
or Automatic (1) via digital input
DI2 2 18-15