WEG CFW300 V1.3X, Руководство по программированию

Страница: 84 / 157

Functions Common to All the Control Modes
11-4 | CFW300
11
P149 - Compensation of the DC Link Voltage
Adjustable
Range:
0 = Inactive
1 = Active
Factory
Setting:
0
Properties: cfg
Description:
It enables the use of Compensation of the DC link.
P150 - Type DC V/f Link Regulator
Adjustable
Range:
0 = Hold_Ud and Decel_LC
1 = Accel_Ud and Decel_LC
2 = Hold_Ud and Hold_LC
3 = Accel_Ud and Hold_LC Factory
Setting:
0
Properties: cfg
Description:
P150 configures the behavior of the ramp for the limitation functions of the DC Link Voltage and Current Limitation.
In those cases, the ramp ignores the reference and takes an action of accelerating (accel), decelerating (decel)
or freezing (hold) the normal path of the ramp. That occurs because of the limit pre-defined in P151 and P135
for the DC Link (Ud) Limitation and for Current (LC) Limitation, respectively.
P151 - DC Link Regulation Level
Adjustable
Range:
348 to 460 V
Factory
Setting:
According to
Table 11.1 on
page 11-4
Properties:
Description:
Voltage level to activate the DC link voltage regulation.
Table 11.1: Actuation Level of the Voltage Regulation
Input Voltage P151 Actuation Band P151 Factory Default
100 to 127 Vac 391 to 460 Vdc 395 Vdc
200 to 240 Vac 348 to 410 Vdc 365 Vdc
Figure 11.2 on page 11-4 shows the block diagram of the actuation of the limitation. Figure 11.3 on page 11-5
and Figure 11.4 on page 11-5 show the example chart.
Ramp
Reference
Output frequency
error
≥ 0
+
-
hold
t
P001
P004
P151
P002
P100-P104
Figure 11.2: Block diagram DC Link voltage limitation